1.6T BERT with MCB&Temperature Control Integrated
Classification:
PSS BERT3T1T65 is a high-speed signal error rate analyzer for multi-channel PAM4 and NRZ applications, with a single-channel signal rate of up to 106.25Gbd. It is mainly used for testing scenarios of R&D and testing of 1.6T/800G modules. It adopts an integrated optical port solution with built-in TEC+ water-cooled temperature control, supporting module DDM temperature testing from 0-70℃. The product is plug-and-play, enabling rapid R&D and production testing. The transmitting end includes a pre-emphasis adjustment mode and eye-shape adjustment for PAM4 signals. The receiving end features equalization and FEC functions, and provides data graphical analysis. It also offers an optimal solution for automated production testing of high-speed optical transceiver modules.
- Application
- Characteristic
- Specifications
- Download
-
Application
1. 1.6T/800G high-speed module tri-temperature transceiver test
2. AOC, ACC, AEC, DAC cable testFeatures
Bit Error Analyzer
1. PAM4 rate support: 53.125GBaud/106.25GBaud
2. Multiple patterns: PRBS7/9/11/13/15/23/31/58, PRBS7~58Q, SSPRQ, User patterns, etc.
3. The transmitter supports pre-emphasis function
4. The receiver supports equalization, SNR testing and eye diagram simulation analysis
5. Support KP4 FEC functions, Symbol Errors error distribution analysis
Eye Diagram Simulation Analysis
\
FEC Symbol Errors
6. Support internal and external IIC switching, and open the optical module debugging function. Users can use GUI to operate module registers
Temperature control part
1. High temperature control efficiency, using double-sided TEC design
Cooling Curve (OSFP @28W)
Heating Curve (OSFP @28W)
2. TEC all-round protection, real-time monitoring of the temperature difference between hot and cold surfaces, combined with algorithms to improve service life
3. Innovative shell temperature monitoring, to achieve real-time feedback of module shell temperature
4. Independent water circulation at ports, no mutual influence
5. Support temperature cycling scenarios
Complete machine
1. Support simultaneous testing of two ports, switching tests between different packages such as OSFP/OSFP-RHS/QSFP-DD, adapting to different scenarios
2. Modular design, DUT jig quickly disassembled and maintained
DUT Jig
3. High reliability, targeted protection design for airflow, water path, and optical module
4. SRC remote interactive control enables users to test software and experience new GUI interaction
5. Support multiple connections of LAN ports, multi-interface application
6. High space occupancy rate, low testing cost
1.6T Optical Module Error Data (FEC)
1.6T Optical Module Error Data
Specification
Note:
[1] Support frequency deviation test and setting of arbitrary rate points (within the allowable PLL bandwidth, contact the manufacturer for details);
[2] For different solutions, equalization ability differs, contact the manufacturer for details
Note: [1]The heating and cooling efficiency shall be evaluated based on actual test results such as the power consumption of the customer's product and the location of the heat source.
Note: [1]Only the number of plug-in and pull-out times during power-on is recorded.
[2]Due to water circulation in the jig, hot plugging is not supported. Replacement must be performed when the device is powered off.
Note:
[1]Different ports have different BERT modules and module fixtures.
[2]OSFP/OSFP-RHS/QSFP-DD are three independent jigs.
[3]When devices with different numbers of ports are equipped, the host power will be different.
[4]Depending on the requirements of different ports, the power of the water cooler will vary, and the device will be shipped with a water cooler.
Key words:
Focus on us
Tel
086-27-8990 8766
