Constant Current Pulse Source
Classification:
PSS PLT2303 pulse source is mainly used for testing of high-power lasers such as RGB Chip, COS/COC, TO and Bar. It supports the sweep test of pulse and DC PIV characteristic curves and the calculation of characteristic parameters, the reverse leakage current test, VBR test and test of spectral characteristics (external spectrometer required). It integrates the functions of pulse current source, ammeter, voltmeter and optical power meter, and has the characteristics of small volume, fast test speed and simple use.
- Application
- Characteristic
- Specifications
- Download
-
Application
1. RGB high-power Chip, COS and TO Testing
2. High-power Bar, COC power-on testingFeatures
1. Support minimum 5μs pulse output, duty cycle 0~100% adjustable
2. Support maximum DC 3A/10V, maximum pulse output 10A/10V
3. Support reverse leakage current test, max. reverse bias voltage 70V
4. Support VBR breakdown voltage test, maximum breakdown voltage 70V
5. Support pulse edge slew rate control, which can adapt to different devices without overshoot
6. Support four-wire voltage testing to maximize the measurement accuracy
7. Support parallel output of multiple devices, provide greater output current
8. Support high-speed acquisition and drawing of pulse waveform, monitor pulse waveform in real time
9. Support 2-channel synchronous pulse trigger output, with adjustable polarity and synchronous pulse width
10. Support external trigger input to achieve accurate synchronous timing control with external equipment
11. Support switching of output polarity, adapt to devices with different pin definitions
12. Support pretest, short-circuit and over-temperature protection function to ensure the safe operation of devices
13. Provide external integrating sphere (optional) for large power optical testing
14. Wavelength range 850~1700nm of PD responseSpecification
Key words:
Focus on us
Tel
086-27-8990 8766
