A Powerful Enabler for High-Density Parallel Silicon Photonics Mass Production Test | PSS Self-developed PXIe Modular Source Measure Units (SMUs)

Release time:2026-11-18


 

 

 

 

PXIe Series Modular Source Measure Units (SMUs)

 

For mass production testing of semiconductors and optoelectronic devices, requirements for multi-channel synchronization, high-speed pulsing and low-level signal measurement keep rising. Conventional solutions based on stacked discrete instruments have inherent bottlenecks in synchronization consistency, space integration and system maintenance.

PSS self-developed PXIe series modular SMUs adopt an architecture with fully self-developed independent SMU channels. Modular PXIe bus enables high-density parallel source-measurement, combining high-speed pulsing capability with fA-level low-current resolution. They serve as a stable, reusable domestic test foundation for wafer, chip and optoelectronic device mass manufacturing.

 

Modular Parallel Architecture with Independent SMU per Channel

 

 

These PXIe modular SMUs are available in 1/4/8/12/16-channel configurations. All channels operate independently and support synchronized parallel testing to drastically boost throughput for wafer and device batch testing.

 

01 Ultra-high-precision Low-level Measurement

Resolution down to 10fA/100nV, covering pA/nA low-current measurement scenarios. Ultra-low output ripple ensures reliable accuracy for faint current detection.

 

 

 

 

02 Comprehensive Key Specifications

Well-rounded performance to meet diverse test requirements: minimum pulse width of 5μs, maximum output current up to 10A, maximum output voltage 60V, 20W max DC output power and 500W max pulsed power with adjustable duty cycle (0~100%), suitable for high-speed signal acquisition and dynamic characterization.

 

 

03 Flexible & Controllable Pulsed Testing

Digitally adjustable pulse edges to accommodate varied cables and devices and suppress waveform overshoot.

 

 

 

 

 

04 High-speed Signal & Transient Capture

Up to 1 MS/s sampling rate for high-speed acquisition and precise capture of device transient behaviors.

 

 

 

05 Guard Protection & 4-wire Kelvin Measurement

Support 2-wire/4-wire measurement and Guard output to minimize lead-induced errors.

 

06 Automation & System Integration

Compliant with standard SCPI command set, bundled with device drivers and sample codes. Support custom scripts and multi-file switching for efficient test development. Dual configuration modes: list mode & script mode, delivering low-latency execution to improve mass-production test efficiency.

 

Local SMU Script Execution Example

 

 

 

Efficiency Comparison among Different SMU Configuration Modes

 

07 DUT Protection

Superb EOS suppression capability to safeguard the Device Under Test (DUT) under complex operating conditions.

 

 

 

 

 

08 Analog Follow Output

Linear and logarithmic analog output modes available, tailored for special applications such as silicon photonic device coupling alignment.

 

 

 

 

 

09 Multi-Slot Expansion & High-Density Synchronized Triggering

Flexible channel expansion via multi-slot configuration for high-density channel integration. Precision synchronized triggering guarantees timing consistency across multi-channel parallel tests.

Model Selection Matrix Covering Various Power & Channel Requirements

 

 

Characterization for optoelectronic and semiconductor mass production, ideal for:

 

- Semiconductor wafer and chip characterization

- LD laser, silicon photonic device characterization

 

Ranging from single-channel high-power pulsed models to 16-channel high-density low-signal variants, the portfolio addresses R&D evaluation, pilot runs and ATE integration for mass production:

 

 

 

Single-channel: PSS PXIe-5110/5111, ±60V high voltage, up to 500W pulsed power, for high-power devices

4-channel: PSS PXIe-5140/5141/5142, ±10V~±30V, optimized for optical chips, diodes, etc.

8/12/16-channel high-density: PSS PXIe-5180/5112/5116, for high-volume parallel wafer testing

 

 

 

Why Choose Our PXIe SMUs?

 

Domestic substitution for cost reduction and supply security: all core technologies self-developed, eliminating pain points of imported instruments including high pricing, long lead times and delayed overseas maintenance.

✅ One-stop product portfolio: benchtop SMUs, production modular cards and high-voltage test instruments all under one brand, eliminating the need to assemble systems from multiple vendors.

✅ Reusable platform: unified SCPI and script ecosystem. Codes developed at the R&D stage can be directly ported to mass-production PXIe systems to avoid redundant development.

✅ Benchmark-class performance: pA/nA low-current measurement, four-quadrant output and narrow-pulse capability, matching core test demands of optical chips and power devices.

✅ Local rapid support: domestic technical team providing sample evaluation, on-site commissioning, calibration training and long-term maintenance with fast response.

 

 

 

Precise Electronics focuses on precision testing for optoelectronics and semiconductors, continuously refining stable, reliable domestic SMU solutions. The PXIe series high-performance modular SMUs feature independent multi-channel design, high-precision source-measurement and high-speed synchronized triggering. Compatible with standard SCPI commands, they fit into automated R&D and mass-production systems for wafer parametric tests, optical communication devices, lasers and discrete semiconductors. The modular design enables flexible cost reduction and throughput improvement, empowering autonomy of domestic chip fabs.

 

For instruction manuals and technical discussions, please leave a message or contact our application engineers.