+
  • 200G.png

200G BERT

Classification:


PSS 200G high-speed bit error rate tester (PSS BERT18881) is a 200G high-speed signal bit error performance analyzer, which supports arbitrary selection rates within 9.95G-15G and 24.33G-32G. The 8 channels of PPG and 8 channels of ED receive-transmit end signals can work simultaneously or independently, single channel supports a maximum rate of 32G. This series has two detection modes: timing and continuous detection. It supports customizing various rates and patterns required for measurement, can adjust parameters such as polarity and balance, and supports arbitrary rate adjustment, which is convenient for the performance analysis of R&D. The series can be widely used in optical test scenarios such as 100G, 200G optical modules and subsystem R&D and production.


  • Application
  • Characteristic
  • Specifications
  • Download
    • Commodity name: 200G BERT
    • 型号: PSS BERT18881
    • Describe: Support up to 8 channels of 10G-32G high-speed signals

    PSS 200G high-speed bit error rate tester (PSS BERT18881) is a 200G high-speed signal bit error performance analyzer, which supports arbitrary selection rates within 9.95G-15G and 24.33G-32G. The 8 channels of PPG and 8 channels of ED receive-transmit end signals can work simultaneously or independently, single channel supports a maximum rate of 32G. This series has two detection modes: timing and continuous detection. It supports customizing various rates and patterns required for measurement, can adjust parameters such as polarity and balance, and supports arbitrary rate adjustment, which is convenient for the performance analysis of R&D. The series can be widely used in optical test scenarios such as 100G, 200G optical modules and subsystem R&D and production.

    Product Application

    • SFP+, SFP28, QSFP28, QSFP56 module test 
    • Active Optical Cable (AOC), High Speed Cable (DAC) test
    • Optical components and devices test (BOSA, TOSA, ROSA)
    • High-speed integrated electronic circuit, PCB, electronic module subsystem and system test

  • Product Features

    • Multiple rate options: 9.95-15G, 24.33-32G rate points, support any rate adjustable     
    • 8 transmit & 8 receive independent channel BER test function   
    • Support various code types: PRBS7、PRBS9、PRBS15、PRBS23、PRBS31,User40
    • Support continuous detection and timing detection         
    • Polarity and balance can be adjusted         
    • The output eye diagram jitter signal is low and the rise time is short       
    • Provide secondary development interface

     

    Electrical eye diagram, test conditions: 25.78G,PRBS31

  • Parameters

    Unit

    Typical values

    Rate

    Gbps

    9.95~15  continuously adjustable

    24.33~32   continuously adjustable

    PPG End

     

    Code pattern

    PRBS

    7、9、15、23、31、User pattern 40bit

    RMS

    fs

    1400

    700

    PP jitter

    ps

    9.5

    4.2

    Rise time (20%~80%)

    ps

    17

    16

    Fall time (20%~80%)

    ps

    17.5

    16.5

    Electrical emission channel amplitude

    mv

    < 1000

    ED End

     

    Code pattern

    PRBS

    7、9、15、23、31

    Receiving level sensitivity

    mv

    > 40

    Input and output impedance

    Ω

    单端50  差分100

    Trigger out

     

    Trigger clock frequency ratio

    -

    8  frequency division

    Ref Clock in

     

     

    External clock input amplitude

    mv

    600-1600

    Clock input percentage

    %

    40~60

     

    RF interface

    -

    K type 2.92mm, Female

    Communication Interface

    -

    RS232

    Power supply

    -

    AC 100~240V,50~60Hz,15W

    Size(L*W*H)

    mm

    431×426×112mm