Pulse Current Source
Classification:
PSS PLT2302 source meter is applicable for testing high-power lasers such as visible laser, high-power BAR and VCSEL array. It supports pulse and DC PIV characteristic curve sweep test and characteristic parameter calculation, and supports spectral characteristic test (external spectroscope required). The instrument integrates the functions of pulse current source, ammeter, voltmeter and optical power meter, and has the characteristics of small volume, fast test speed and simple use.
- Application
- Characteristic
- Specifications
- Download
-
Application
1. RGB high power Chip, COS, TO test
2. High power Bar, COC power-on testFeatures
1. Support us-level pulse, DC output and test
2. Support pulse and DC PIV high-speed sweep test
3. Support DC/pulse, DC output capacity up to 10A/20V, pulse output capacity up to 30A/20V, pulse width 5us at minimum
4. Support pulse edge slope control, adapt to different devices without overshoot
5. Support voltage two-wire and four-wire detection to maximize measurement accuracy
6. Support parallel output of multiple devices to provide greater output current
7. Support high-speed acquisition and mapping of pulse waveforms, real-time monitoring of pulse waveforms
8. Support 2-channel synchronous pulse trigger output, polarity and synchronous pulse width adjustable
9. Support external trigger input to achieve precise synchronous timing control with external devices
10. Support output polarity switching to adapt to devices with different pin definitions
11. Support pre-check output protection function to ensure safe operation of devices
12. Support output short-circuit protection and device over-temperature protection
13. Provide external integrating sphere (optional) for high-power optical detection
14. PD response wavelength range 850~1700nmSpecification
Key words:
Focus on us
Tel
086-27-8990 8766
