Products

Product

Product
图片名称
PLT2302A High-Power Pulse Source

PLT2302A High-Power Pulse Source

View Details

PSS PLT2302A

PSS PLT2302A pulse source is mainly used for testing of high-power lasers such as RGB Chip, COS/COC, TO and Bar. It supports the sweep test of pulse and DC PIV characteristic curves and the calculation of characteristic parameters, and the test of spectral characteristics (external spectrometer required). It integrates the functions of pulse current source, ammeter, voltmeter and optical power meter, and has the characteristics of small volume, fast test speed and simple use.

Voltage 5V, current 20A, mainly applied to the testing of high-power lasers such as RGB Chip, COS/COC, TO and Bar. It supports DC PIV characteristic curve sweep testing and characteristic parameter calculation

Pulse Current Source

Pulse Current Source

View Details

PSS PLT2302

PSS PLT2302 source meter is applicable for testing high-power lasers such as visible laser, high-power BAR and VCSEL array. It supports pulse and DC PIV characteristic curve sweep test and characteristic parameter calculation, and supports spectral characteristic test (external spectroscope required). The instrument integrates the functions of pulse current source, ammeter, voltmeter and optical power meter, and has the characteristics of small volume, fast test speed and simple use.

Voltage 26V, DC 10A, pulse 30A, minimum pulse width 5μs, duty cycle 0~100%

25G Clock Data Recovery

25G Clock Data Recovery

View Details

PSS CDR25012

PSS clock data recovery is a high-performance, cost-effective CDR module that can extract clock signals from data signals of the environments such as optical modules or backplanes. It supports 25.78Gbps~28.05Gbps NRZ signals and 25.78baud~28.9Gbuad PAM4 signals. It is characterized by automatic locking of signals and easy operation. It supports the loop bandwidth setting. It is applied to the clock data recovery of high-speed optical signals. The recovered Clk frequency is adjustable and supports up to 40 divisions.

Support 25.78~28.05GBd NRZ/PAM4 optical signal clock recovery

10G Clock Data Recovery

10G Clock Data Recovery

View Details

PSS CDR10102

PSS clock data recovery is a high-performance, cost-effective CDR module that can extract clock signals from data signals of the environments such as optical modules or backplanes. It supports automatic locking of 6.5M~11.3Gbps rate signals and is easy to operate. It is widely used in PON, serial loopback line detection and conventional multi-channel optoelectronic test environments.

Support 0.0065~11.3Gbps NRZ optical signal clock recovery

25G Sampling Oscilloscope

25G Sampling Oscilloscope

View Details

PSS DCA25021

DCA25021 optical sampling oscilloscope is used for testing of transmitter performance indicators. It supports 4-channel optical signal input, NRZ and PAM4 signal testing. The optical channel bandwidth is 30GHz with a variety of typical filters. The electrical channel bandwidth is up to 35GHz.

4-channel optical signal input, NRZ and PAM4 signal testing, electrical channel bandwidth 35GHz, optical channel bandwidth 30GHz, 750nm~1650nm wavelength

10G Sampling Oscilloscope

10G Sampling Oscilloscope

View Details

PSS DCA10021

DCA10021 optical sampling oscilloscope is used for testing of transmitter performance indicators. It supports optical and electrical interface input. The optical channel has a typical filter for optical ports of 10Gbps and below, and the electrical channel bandwidth is up to 20GHz. The best vertical resolution and high sampling rate ADC are used to implement continuous equivalent sampling technology, and the eye diagram reconstruction is completed in combination with the algorithm. The excellent circuit design ensures that the system noise is as low as 3uw or less. With a calibrated reference receiver (in line with industry tolerance standards), it perfectly meets the industry's needs for accurate testing of digital waveforms. Characterized by high-precision, low-noise, low-cost, fast sampling oscilloscopes provide customers with a one-stop solution for optoelectronic performance testing.

1-channel optical signal input and 1-channel electrical signal input, NRZ signal testing, electrical channel bandwidth 20GHz, optical channel bandwidth 10GHz, 750nm~1650nm wavelength

< 1...17181920 > proceed page